THERMOFORMING

B75

B75

The B75 press is a machine designed to thermoform materials of various types.
It comes complete with an electronic system, managed by a touchscreen for quick and easy set up of all machine functions.
2 displayed thermo-regulators allow you to adjust the temperature with precision.
The work area is protected using a class 4 safety barrier. .
The touchscreen programming console means you can create different work cycles.
Printing depth can be made either with pressure or by adjusting a depth measurement.
Adjustable degassing at different pressures.

Technical data:
Automatic trolley
Adjustable trolley speed
Class 4 safety barriers
Power 250 Ton
Automatic press call
Working area 1400 x 400
Maximum stroke of 220mm press
220mm opening
Plc programmable to control functions
Automatic stroke setting
Preset pressure setting can be memorized

B93

B93

The B93 press is a machine designed for cutting various materials.
Its features make it unique in its kind.
It comes complete with an electronic system, operated by a touchscreen that allows for quick and easy setup of all machine functions,
2 thermo-regulators displayed allow you to adjust the temperature accurately.
The protection of the working area is carried out through a class 4 safety barrier.
The touchscreen programming console allows you to create different work cycles.
The cutting depth can be carried out by pressing or adjusting a cutting section.

Technical data:
Automatic trolley
Adjustable trolley speed
Class 4 safety barriers
Power 300 Ton
Automatic pressure recall
Workbench 750 x 600
Maximum stroke of 85mm press
85mm opening
Mould / die fixing system on the trolley
Plc programmable for function control
Automatic stroke setting
Preset pressure setting can be memorized

B09

The B09 press is a machine designed for cutting various materials.
2 thermo-regulators displayed allow you to adjust the temperature accurately.
The protection of the working area is carried out through a class 4 safety barrier.

Technical data:
Automatic trolley
Adjustable trolley speed
Class 4 safety barriers
180 Ton Power
Automatic pressure recall
Workbench 1200 x 1000
Max stroke 150mm press
Opening 150mm
Moulding system on the automatic head
Plc programmable for function control
Automatic stroke setting
Preset pressure setting can be memorized

B94

The B94 press is a machine designed for cutting various materials.
Its features make it one of a kind.
It is complete with an electronic system, operated by touchscreen that allows a quick and easy setup of all machine functions,
2 thermo-regulators displayed allow you to adjust the temperature accurately.
The protection of the working area is carried out through a class 4 safety barrier.
The touchscreen programming console allows you to create different work cycles.
The cutting depth can be applied by pressing or adjusting a cutting section.

Technical data:
Automatic trolley
Adjustable trolley speed
Class 4 safety barriers
Power 450 Ton
Automatic press call
Workbench 100 x 600
Maximum stroke of 85mm press
85mm opening
Mould / die fixing system on the carriage
Plc programmable for function control
Automatic stroke setting
Preset pressure setting can be memorized

A06V

presses for vulcanising rubber

The A06V press is a thermoforming machinedesigned to vulcanise rubber and its by-products. The processing cycle is fully automatic and programmable. The pressing time is managed by a PLC. The programmable degassing system allows for the expulsion of gases produced by the material. The press is equipped with a photocell system to ensure maximum safety for the operator. Upper heating is controlled by a temperature regulator with display. Lower heating is controlled by a temperature regulator with display.

Technical data:
Automatic carriage
Adjustable carriage speed
Class 4 safety barriers
Power 180 tonne
Micro contact manometer for automatic control
Automatic engine shutdown
Programmable degassing
700 x 600 Worktop
Maximum pressure piston stroke 130 mm
130mm Opening
Folding plate with automatic opening
Modern buttons
Programmable PLC for function control
Automatic stroke counter
Programmable pressing time

TWO-HEAD THERMOFORMING PRESS WITH TROLLEY

The A67 thermoforming pressis a machine designed to vulcanise rubber and its by-products.The processing cycle is fully automatic and programmable.The pressing time is managed by plc.
The 2 heads are completely independent.
Trolleys facilitate the placement of the material to be machined
The press is equipped with a photocell system to ensure maximum safety for the operator. displayed.

Technical data:
Class 4 safety barriers
Power 40 ton
Automatic shut off engine
Automatic trolleys
Workbench 300 x 400
Maximum stroke of 120mm pressure piston
120mm opening
Adjustable mechanical stop
Plc programmable for control functions
Automatic counters
Preset pressure setting can be memorized

THERMOFORMING PRESS WITH 2 HEADS

The B10 thermoforming pressis a machine designed to vulcanise rubber and its by-products.The processing cycle is fully automatic and programmable.Pressing time is managed by plc.
The 2 heads are completely independent.
The right side has double heating, the left side has 2 cooling plates.
The press is equipped with a photocell system to ensure maximum safety.Higher heating is controlled by a temperature regulator with display.Lower heating is controlled by a temperature regulator with display.

Technical data:
Class 4 safety barriers
Power 40 ton
Automatic shut off engine
Workbench 300 x 400
Maximum stroke of 120mm pressure piston
120mm opening
Adjustable mechanical stop
Plc programmable for control functions
Automatic counters
Preset pressure setting can be memorized

152

sale of presses for vulcanising rubber

The 152 thermoforming pressis a machine designed to vulcanise rubber and its by-products. The processing cycle is fully automatic and programmable. The pressing time is managed by a PLC. The programmable degassing system allows for the expulsion of gases produced by the material. The press is equipped with a photocell system to ensure maximum safety for the operator. Upper heating is controlled by a temperature regulator with display. Lower heating is controlled by a temperature regulator with display.

Technical data:
Automatic carriage
Adjustable carriage speed
Class 4 safety barriers
Power 120 tonne
Micro contact manometer for automatic control
Automatic engine shutdown
Programmable degassing
500 x 400 Worktop
Maximum pressure piston stroke 200 mm
200mm Opening
Folding plate with automatic opening
Modern buttons
Programmable PLC for function control
Automatic stroke counter
Programmable pressing time

095

presses for vulcanising rubber

The 095 press is a machine designed to vulcanise rubberand its by-products. The processing cycle is fully automatic and programmable. The pressing time is managed by a PLC. The programmable degassing system allows for the expulsion of gases produced by the material. The press is equipped with a photocell system to ensure maximum safety for the operator. Upper heating is controlled by a temperature regulator with display. Lower heating is controlled by a temperature regulator with display.

Technical data:
Automatic carriage
Adjustable carriage speed
Class 4 safety barriers
Power 180 tonne
Micro contact manometer for automatic control
Automatic engine shutdown
Programmable degassing
700 x 400 Worktop
Maximum pressure piston stroke 85mm
85mm Opening
Modern buttons
Programmable PLC for function control
Automatic stroke counter
Programmable pressing time

THERMOFORMING GROUP B82

The B82 is made up of 1 press, 1 furnace, 1 refrigerator.

The B82 press is a thermoforming machinedesigned to vulcanize microporous material and its derivatives.The processing cycle is fully automatic and programmable.Pressing time is managed by plc.
It comes complete with plates and cooling circuit.
The press is equipped with a photocell system to ensure maximum safety for the operator.

The B82F furnace is created for the preheating of the material.
It has 4 drawers at constant temperature.
Thermoregulator displayed and forced ventilation system

The chiller goes to the press to bring the plates to a temperature of 2-3 °

Technical data:
Automatic trolley
Adjustable trolley speed
Class 4 safety barriers
Power 120 ton
Automatic shut off engine
Workbench 650 x 400
Maximum stroke of the 130mm presser piston
130mm opening
Plc programmable for control functions
Automatic counters
Preset pressure setting can be memorized

THERMOFORMING GROUP B92

The B92 is made up of 1 press, 1 furnace, 1 refrigerator.

The B92 press is a thermoforming machinedesigned to vulcanise EVA material and its derivatives.The working cycle is fully automatic and programmable.
The touchscreen PLC manages the pressing times, the clamp movements for the material to be printed, the speed of the furnace belt.
It comes complete with plates and cooling circuit.
The loading of the moulds is carried out through the side trolley.
The press is equipped with a photocell system to ensure maximum safety for the operator.

The B92F furnace is created for preheating the material.
It has a 3000mm chamber
The belt is motorized
The heating is double and is controlled by a thermo-regulator displayed with a forced ventilation system

The chiller is pressed to bring the plates to a temperature of 2-3 °

Technical data:
Automatic trolley
Adjustable trolley speed
Adjustable belt speed
Class 4 safety barriers
Power 120 ton
Automatic shut off engine
Workbench 500 x 400
Maximum stroke of the 130mm presser piston
130mm opening
Plc programmable for control functions
Automatic counters
Preset pressure setting can be memorized

Share by: